Overview

After the installation of locks, it is recommended to follow these checklist to ensure youf lock is operationing as designed.

IntelliMortise Installation Guide

IntelliMortise Post-Installation Checklist

• [ ] Insert batteries into lock, and confirm the lock powers up
  • If lock does not power up, follow troubleshooting steps
• [ ] Check that the exterior handle of the lock can only be turned downwards
  • If you can turn the handle both upwards and downwards, please refer to Step 10 in the IntelliMortise Installation Manual
• [ ] With the door closed and latched, turn the deadbolt thumb turn in and and out to confirm smooth operation
  • Check the mortise faceplate for alignment
  • Check the strike plate for alignment
• [ ] Insert the key into the cylinder, and ensure the key is able to:
  • [ ] Retract the latch
  • [ ] Throw and retract the deadbolt
• [ ] Throw the deadbolt, then rotate the inside handle downwards and confirm the deadbolt automatically retracts with a single motion
• [ ] Ensure Firmware is up-to-date
  • The best time to update firmware is at time of installation